In past few years 80% of them are "bad" clones, and unfortunately this ratio grows. "Bad"Ĭlones are not fully compatible with original ELM327 and will not work with FORScan. Software that uses standard OBDII protocol usually work with these adapters, so people usually don't Service level protocols and requires adapters that are fully compatible with original ELM327. Windows 2000/XP/Vista/7/8/8.1/10 (ELM327-compatible adapters with COM, USB, Bluetooth and WiFi interfaces, J2534 PassThru adapters).FORD MS CAN (only for J2534-2, CANtieCAR, OBDLink EX/MX/MX+, ELS27 or modified ELM327)Īlmost all of modules availabe through supported protocols.But "good" clones may have other problems (for example, USB adapters cannot work faster Obtain either original white-label adapters listed above (Scantool OBDLink, ELS27), or look forĮLM327 marked as "Ford Mazda FORScan" etc compatible - these are usually "good" clones equipped with The problem is that service protocols are more complex than regular OBDII onesĪnd this is why it is physically impossible to make FORScan work using these devices. Note: only x86 architecture is supported for Windows. iOS v9.0 and higher (OBDLink MX+, ELM327 BLE and WiFi adapters).Android v4.0 and higher (ELM327 Bluetooth and WiFi adapters).
0 Comments
Leave a Reply. |